Connecting a DVD Player or other equipmentSwitch off TV and external equipment before connecting cables. (Cables are not supplied.)❶ Connect a DVD Player or other equipment’s interlaced Component Video Output to theTV Component Video Input (Y-Pb-Pr) Jacks.❷ Connect the DVD Player’s Audio Output to the TV Component L/R Jacks.❸ Press POWER to turn on the TV. Turn on external equipment also.❹ Press the INPUT key to select COMPONENT3.Note: DVD Player component output must be set to Interlaced (480i).Y PB PRRL AUDIOVIDEO COMPONENT VIDEO OUTS-VIDEO OUTA/V OUTS-VIDEOVIDEO AUDIO INPUTYP bP rAV2 AV1COMPONENTR R R RL L L L(MONO) (MONO)UHF/VHF/CATV75ΩAUDIOOUTPUTVIDEOAUDIOAUDIODVD Player❶TV BackINPUT POWER RESETDVD SAT AUXVCR TV CABLE❸Remote ControlWhat you will need for connections:❶ Component video cable – 1❷ Audio Cable – 1What you will need for connections:❶ Audio Cable – 1Using the Component Audio/Video Input JacksQuickTips■ You may be ableto use the TV remotecontrol to operateyour DVD Player.(See pages 9 ~11).■ A solid Blue screenwith COMPONENT3displayed meansthat the Compo-nent Video modeis selected, butno signal is beingdetected at the Com-ponent jacks. Checkconnection, andturn on externalequipment.■ Position your TVat least 2 feet fromstereo speakers.The magnets in thespeakers may affectthe picture quality.Need help?Visit our Web site atwww.sanyoctv.comor Call 1-800-877-5032 ❶❹Press INPUT key afterconnecting cables to access theA/V inputs.There is NO need to tune to ablank channel.❷❷S-VIDEOVIDEO AUDIO INPUTYP bP rAV2 AV1COMPONENTR R R RL L L L(MONO) (MONO)AUDIOOUTPUTVIDEOAUDIOAUDIOBack of TVStereo AmplifierUsing the Audio Output JacksConnecting Audio Output Jacks to a Stereo AmplifierSwitch off TV and external equipment before connecting cables.(Cables are not supplied.)❶ Connect the TV Audio Output (R/L) to the Stereo Amplifier In (R/L).❷ Press POWER to turn on the TV. Turn on external equipment also.❸ Use the AUDIO OUTPUT on-screen menu options to select Fixed or Variable output signal.Notes: DO NOT connect external speakers directly to the TV.When TV Speakers is in the ON mode, sound willbe produced through your TV and stereo amplifier.When TV Speakers is in the OFF mode, sound will beproduced only through the stereo amplifier.(See page 14 to set TV speakers.)❶6 Component A/V Input / Audio Output Jacks