Sanyo DSR-5016 Instruction Manual

Also see for DSR-5009P: Quick guide

Contents

English 92 NAMES AND FUNCTIONS OF PARTSFront panel1. POWER indicatorLights up when the power is on.2. FULL indicator (JP.81)Flashes when the amount of available memory in the harddisk’s recording area drops to the percentage specified usingmenu settings.In addition, recording stops automatically when no morememory is available, and the FULL indicator switches to apermanently lit condition.The indicator can then be turned off by performing “AREAFULL RESET”.3. ERROR indicator (JP.17)This indicator flashes if the HDD or fan begins to malfunction.4. LOCK indicator (JP.113)Lights up when operations have been locked.The LOCK indicator turns off when the lock condition iscancelled.5. ALARM indicatorFlashes during alarm recording.The ALARM indicator lights up during pre-alarm recording.6. AUDIO OUT (RCA) terminalConnect this terminal and VIDEO OUT terminal to acommercially-available VCR or DVD recorder to enablecopying of recorded audio and video. (Same as the audiooutput terminal on the rear panel)7. VIDEO OUT (RCA) terminalConnects to a commercially-available VCR or DVD recorderto enable copying of recorded video. (Same as the MAINMONITOR output terminal on the rear panel)8. USB terminal (JP.54)Connects to a recordable CD or DVD drive.For compatibility, refer to the SANYO homepage.http://www.sanyosecurity.com/The rear panel and front panel USB terminals cannot beconnected to simultaneously.9. [CAMERA SELECT] buttons and indicatorsWhen one or more cameras have been connected to theVIDEO IN terminals on the digital video recorder’s rear paneland the appropriate [CAMERA SELECT] button is pressed,the corresponding indicator lights up and the video feed fromthat camera is displayed on-screen.z During quad, multi 9, or multi 16 screen display:The indicators corresponding to the cameras beingdisplayed on the monitor light up.z During video loss:The indicator starts to flash.z If an alarm occurs:The indicator for the corresponding camera starts to flash.10. [AUDIO] buttonAudio input channels connected to the rear panel AUDIO INterminal can be switched.Each time this button is pressed, the channel changes in thefollowing order: 1+2, OFF, 1, 2.11. [FUNC.] buttonActivates dome camera operation mode. The operation ofother buttons changes. (JP.145) Use also for advancedmenu functions.12. [QUAD] button and indicator (JP.23)Displays video in quad screens. The indicator lights up whilein quad screen display.The indicator turns off when using a different screen displaymode.13. [MULTI] button and indicator (JP.24)Displays video in multi 9 or multi 16 screen display.The indicator lights up while in multi 9 or multi 16 screendisplay.The indicator turns off when using a different screen displaymode.14. [MON2] button and indicator (JP.26)If the [MON2] button is pressed while a monitor is connectedto the MON2 output terminal on the rear panel, it is possible tochange the monitor 2 video. The [CAMERA SELECT],[SEQUENCE], [QUAD], [MULTI] and [PLUS] buttons can beused. The indicator lights up when this mode is selected.15. [PLUS] button (JP.24)Changes the video from a single camera to quad screen sizeduring multi 9, multi 16, full screen or quad screen display.16. [MENU] button and indicatorDisplays the menu screens (i.e., setting screens), and theindicator lights up while any of these screens is beingdisplayed.SEARCH6 7 81 2 3 4 514 15 169 10 11 12 13MENUMENUEXIT/OSDZOOMSEQUENCE COPY SHUTTLE HOLDTIMER ALARMPLAY/STOPENTER AFIRISFOCUSSTILLREC/STOPPOWER FULL ERROR LOCK ALARMAUDIOMULTIFUNC.TOURSEQUENCEAUTO PANAUDIOVIDEOOUTUSBPLUSMON 2QUADPRESETJOGSHUTTLECLEARENTERPANZOOM/I/FOCARDCARDMENURESETEJECT1 2 3 4 5912 1114 1516 17 182019 21282225 26 27 24232930678 1013