ADVANCED MENU SET8English 1435 Turn the shuttle dial clockwise.Area settings mode is activated and an icon appears in theupper right part of the screen.6 Turn the jog dial to move the cursor (theorange ) to the upper left of theposition where an area is to be set andthen turn the shuttle dial clockwise.The cursor moves to the bottom right.Turn the jog dial to move the cursor to the left or right.Press the [FUNC.] button and turn the jog dial to move thecursor up or down.7 Turn the jog dial to move the cursor (theorange ) to the lower right of theposition where an area is to be set andthen turn the shuttle dial clockwise.The cursor (the orange ) moves to the top left of frame 2.Turn the jog dial to move the cursor to the left or right.Press the [FUNC.] button and turn the jog dial to move thecursor up or down.8 Set the areas in frame 2 and frame 3 inthe same way.The cursor moves to “T-1”.z Turn the shuttle dial counter-clockwise to return to theprevious operation.9 Press the [EXIT/OSD] button.The setting is completed and the display returns to the normalscreen.z If areas coincide, the smaller area number is prioritized.z Large ROI size decreases ROI effectiveness.213CH-01 T-1 LEVEL: OFF TIME LAG: OFFIcon23CH-01 T-1 LEVEL: OFF TIME LAG: OFFFUNC.213CH-01 T-1 LEVEL: OFF TIME LAG: OFFFUNC.213CH-01 T-1 LEVEL: OFF TIME LAG: OFFEXIT/OSD
