GENERAL SET3English 107Use the following procedure to hide the date, time, or otherinformation from the operation display. All items are set to“ON” by default setting. Where necessary, the required itemscan be turned off.1 Press the [MENU] button.The MENU indicator lights up and the isdisplayed.2 Turn the jog dial to select “3.GENERALSET” and then turn the shuttle dialclockwise.The screen is displayed.3 Turn the jog dial to select “1.DISPLAYSET” and then turn the shuttle dialclockwise.The screen is displayed.z Refer to P.108 for details on “VIDEO LOSS”.(1) DATEDisplays and hides the date.(2) TIMEDisplays and hides the time.(3) QUALITYDisplays and hides the picture quality mode.(4) AUDIODisplays and hides the audio recording mode.(5) ALARM COUNTDisplays and hides the number of current alarms.(6) ALARM TYPEDisplays and hides the type of alarm recording.(7) TITLEDisplays and hides the camera titles.4 Turn the jog dial to select “DATE” andthen turn the shuttle dial clockwise.“ON” flashes for “DATE”.5 Turn the jog dial to select “ON ”or“OFF” and then turn the shuttle dialclockwise.The cursor moves to “TIME”.6 Use the same procedure to set the otheritems to “ON” or “OFF”.7 Press the [EXIT/OSD] button.The setting is completed and the display returns to the normalscreen.Setting data displayMENUDATE : ONTIME : ONQUALITY : ONAUDIO : ONALARM COUNT : ONALARM TYPE : ONTITLE : ONVIDEO LOSS : ON01-01-05 00:00:00 REC 1% EN A ALARM 000000002(1) (2)(3) (4)(5) (6)(7)(1) (2) (6)(3)(4) (5)(7)DATE : ONTIME : ONQUALITY : ONAUDIO : ONALARM COUNT : ONALARM TYPE : ONTITLE : ONVIDEO LOSS : ONDATE : ONTIME : OFFQUALITY : ONAUDIO : ONALARM COUNT : ONALARM TYPE : ONTITLE : ONVIDEO LOSS : ONEXIT/OSD
