182 EnglishRECORD SET3INTRODUCTION SETTINGS NETWORKCONTROLNETWORKSETTINGSOTHEROPERATIONIf “OVERWRITE” is set to “OFF” for recording conditions,recording automatically stops when the recording areasbecome full. In this case, AREA FULL RESET can be used tooverwrite previous recordings.4 Click [AREA FULL RESET] under“RECORDING AREA”.To perform AREA FULL RESET for the archive area, click[AREA FULL RESET] under “ARCHIVE AREA”.z When AREA FULL RESET is performed for “RECORDINGAREA”, the recordings in the recording area areoverwritten.z When AREA FULL RESET is performed for “ARCHIVEAREA”, the recordings in the archive area are overwritten.Use the following procedure to set the permission foroverwriting to recording areas or the remaining-space warninglevel.When the recording areas become full, this setting dictateswhether recording stops or continues by overwriting therecorded images currently stored on the hard disk.1 Click the button on the operationpanel.The “MAIN MENU” is displayed.2 Click “2. RECORD SET”.The “RECORD SET” screen is displayed.3 Click “2. RECORDING CONDITIONSSET”.The “RECORDING CONDITIONS SET” screen is displayed.4 Set “OVERWRITE” for the “RECORDINGAREA” to “ON” or “OFF”.[Settings] ( indicates default setting)When the overwrite setting for a recording area is “OFF”, theunit can issue a warning as soon as the remaining spacereaches a specific level. (JP.189)Use the following procedure to set the level at which thewarning is issued.5 Set “REMAINING DISK WARNING” tothe desired remaining-space warninglevel.[Settings] ( indicates default setting)Use the following procedure to set the storage period forrecorded data. When the set period expires, thecorresponding data is automatically deleted.6 Set “AUTO DELETE” to the desiredstorage period.[Settings] ( indicates default setting)7 Click [SAVE].The setting is saved.AREA FULL RESET2. RECORDING CONDITIONS SETSetting overwriting permission for recordingareasRECORDING CONDITIONS SETRECORDING AREAARCHIVE AREAREMAINING DISK WARNING :AUTO DELETE :OVERWRITE :MODE : MANUAL COPYONOFFSAVE1 %4567Setting DescriptionOFF Recording stops when a recording area becomesfull.ONWhen a recording area becomes full, overwritingfrom the beginning of this area startsautomatically.Setting the remaining-space warning levelSetting Description1 - 10 Remaining-space warning level can be set from1% to 10%.Setting AUTO DELETESetting DescriptionOFF Auto delete is disabled.1 - 99DAYSSet the storage period for recorded data from “1DAY” to “99 DAYS” (full days).
