GENERAL SET3English 119When mirroring is set to “ON” and a recording error occurs,change the hard disk used for playback.1 Press the [MENU] button.The MENU indicator lights up and the isdisplayed.2 Turn the jog dial to select “3.GENERALSET” and then turn the shuttle dialclockwise.The screen is displayed.3 Turn the jog dial to select “5.HDD SET”and then turn the shuttle dial clockwise.The screen is displayed.4 Turn the jog dial to select “PLAYBACKDRIVE” and then turn the shuttle dialclockwise.“MASTER” flashes.5 Turn the jog dial to select “MASTER” or“SLAVE” and then turn the shuttle dialclockwise.[Settings] ( indicates default setting)6 Press the [EXIT/OSD] button.The setting is completed and the display returns to the normalscreen.Please contact the dealer from whom you purchased thisdigital video recorder regarding hard disk expansion(replacement). An external hard disk expansion unit (VA-EXHseries) (sold separately) or optional SCSI board and RAID unitcan be used with this digital video recorder.z Initialization must always be performed after expanding thehard disk.z All important recordings should be copied to CompactFlashcards or other storage media before expanding the harddisk.The screen is displayed in the following mannerwhen hard disk expansion is carried out for the DVR orexternal expansion unit.To initialize a recently expanded hard disk, select “NEW DISKINITIALIZE”.To initialize all connected hard disks, select “ALL DISKINITIALIZE”.z When a RAID unit is connected, “ARRAY” is displayedinstead of “EX-DISK”.Switching playback disksMENUDISK 1 : 250GB <- DISK 2 : 250GBEX-DISK 1 : 250GB <- EX-DISK 2 : 250GBEX-DISK 3 : 250GB <- EX-DISK 4 : 250GBDISK INITIALIZE ->CAUTION : ALL RECORDING WILL BE ERASED!MIRRORING : ONPLAYBACK DRIVE : ***DISK 1 : 250GB <- DISK 2 : 250GBEX-DISK 1 : 250GB <- EX-DISK 2 : 250GBEX-DISK 3 : 250GB <- EX-DISK 4 : 250GBDISK INITIALIZE ->CAUTION : ALL RECORDING WILL BE ERASED!MIRRORING : ONPLAYBACK DRIVE : MASTERSetting DescriptionMASTER Playback from the master disk.SLAVE Playback from the slave disk.Expanding (Replacing) andinitializing the hard diskDISK 1 : 250GB <- DISK 2 : 250GBEX-DISK 1 : 250GB <- EX-DISK 2 : 250GBEX-DISK 3 : 250GB <- EX-DISK 4 : 250GBDISK INITIALIZE ->CAUTION : ALL RECORDING WILL BE ERASED!MIRRORING : ONPLAYBACK DRIVE : MASTEREXIT/OSDDISK 1 : 160GB NEW DISK 2 : 160GB NEWEX-DISK 1 : 160GB NEW EX-DISK 2 : 160GB NEWEX-DISK 3 : 160GB NEW EX-DISK 4 : 160GB NEWNEW DISK INITIALIZE ->PLEASE INITIALIZE THE NEW DISKMIRRORING : OFFPLAYBACK DRIVE : ***CAUTION : RECORDING SPEED WILL BELIMITED BY MIRRORING !ALL DISK INITIALIZE ->“NEW” is displayed tothe right of the harddisk capacity for newhard disks.