Sanyo DSR-5016 Instruction Manual

Also see for DSR-5009P: Quick guide

Contents

142 EnglishADVANCED MENU SET8INTRODUCTION SETTINGS NETWORKCONTROLNETWORKSETTINGSNETWORKOPERATIONOTHEROPERATION18 Turn the shuttle dial clockwise.“OFF” flashes.19 Turn the jog dial to select the time lagand then turn the shuttle dial clockwise.[Settings] ( indicates default setting)20 Press the [EXIT/OSD] button.The setting is completed and the display returns to the normalscreen.Use the following procedure to select the position of the areasfor ROI.1 Press the [MENU] button.The MENU indicator lights up and the

isdisplayed.2 Turn the jog dial to select“8.ADVANCED MENU SET” and thenturn the shuttle dial clockwise.The screen is displayed.3 Turn the jog dial to select “1.ROI SET”and then turn the shuttle dial clockwise.The screen is displayed.4 Turn the jog dial to select “AREA/SENSITIVITY SET” and then turn theshuttle dial clockwise.The screen is displayed.The normal camera image is displayed overlapping.The frame for the number is not displayed if “QUALITY” is setto “OFF” in the previous screen.Setting DescriptionOFF No operation after the response-stop1S - 10S Time lag after the response-stop (seconds)213CH-01 T-1 LEVEL: OFF TIME LAG: OFF213CH-01 T-1 LEVEL: OFF TIME LAG: OFFEXIT/OSDSetting ROI areasMENUCH-01 QUALITY ACTIVE ROISTATIC AREA 1 : ON OFFSTATIC AREA 2 : ON OFFSTATIC AREA 3 : ON OFFEFFECTIVE REC MODE : NORMAL RECAREA/SENSITIVITY SET ---->213CH-01 T-1 LEVEL: OFF TIME LAG: OFF