RECORD SET3English 187Audio can be recorded together with images during alarmrecording. Note, however, that since this audio data is alsostored in the recording area, the recording time for this areadecreases.6 Set “AUDIO RECORDING”.[Settings] ( indicates default setting)z Audio recording can be enabled when the recording rate isbetween A60 and A1 FPS.7 Set “ALARM INTERLEAVE” to thedesired recording pattern.[Settings] ( indicates default setting)8 Set “REC RATE” to the desiredrecording rate.[Settings] ( indicates default setting)The letter “A” is displayed in front of recording rates that canbe set for audio recording.z When only one camera is connected, recording isperformed at 30 FPS even if 60 FPS is set.z When two or more cameras are connected and 60 FPS isset, the actual recording rate is roughly the recording ratedivided by the number of cameras. (Example: When 6cameras are connected and the recording rate setting is 60FPS, the actual recording rate is 10 FPS)9 Set “DURATION” to the desired alarmrecording duration.[Settings] ( indicates default setting)Use the following procedure to set the recording conditions tobe used for pre-alarm. (JP.162)10 Set “PRE-ALARM RECORDING” to“ON” or “OFF”.[Settings] ( indicates default setting)z If “ALARM RECORDING” is set to “OFF”, the PRE-ALARMRECORDING setting is displayed as “**” and cannot beset.11 Set “REC RATE” to the desiredrecording rate.[Settings] ( indicates default setting)The letter “A” is displayed in front of recording rates that canbe set for audio recording.Setting audio recordingSetting DescriptionOFF Audio is not recorded.ON Audio is recorded.Setting the alarm interleaveSetting DescriptionONLY Video is recorded only from cameras with an alarmoccurring.SWRecording is switched between video from acamera for which an alarm has occurred and videofrom all connected cameras.Setting DescriptionA60, A30, A20, A15,A10, A7.5, A6, A5, A4.286,A3.75, A3.333, A3, A2.727,A2.308, A2, A1.667,A1.429, A1.25, A1.111, A1Recording is performed at theselected recording rate (unit:FPS). (Audio can be recorded.)0.5, 0.333, 0.25, 0.2, 0.1,0.05, 0.033Recording is performed at theselected recording rate (unit:FPS). (Audio cannot be recorded.)Setting Description5SEC, 10SEC, 20SEC,40SEC, 1MIN, 2MIN, 3MIN,4MIN, 5MIN, 10MIN, 15MINRecords for the set duration foreach alarm.CCRecords while an alarm isactivated (Recording continuesfor five seconds even if less thanfive seconds).Setting pre-alarm recording.Setting DescriptionOFF Pre-alarm recording is disabled.ON Pre-alarm recording is enabled.Setting DescriptionA60, A30, A20, A15,A10, A7.5, A6, A5, A4.286,A3.75, A3.333, A3, A2.727,A2.308, A2, A1.667,A1.429, A1.25, A1.111, A1Recording is performed at theselected recording rate (unit:FPS).
