RECORD SET2English 7716 Press the [EXIT/OSD] button.The setting is completed and the display returns to the normalscreen.z The recording duration is automatically calculated basedon recording settings and the number of connectedcameras, and this is indicated by “RECORDINGDURATION”. If a valid figure cannot be calculated,“ERROR!” is displayed.z When easy setup settings and individual settings are bothset, the most recent settings override previous settings.z Easy setup settings cannot be used with programrecording or day-specific timer recording.Use the following procedures to confirm the hard disk’s totalrecording capacity and also the allocation for each recordingarea.1 Press the [MENU] button.The MENU indicator lights up and the isdisplayed.2 Turn the jog dial to select “2.RECORDSET” and then turn the shuttle dialclockwise.The screen is displayed.3 Turn the jog dial to select“2.RECORDING AREA SET” and thenturn the shuttle dial clockwise.The screen is displayed.z When the recording area allocation is changed, the harddisk is initialized and all previous recordings are deleted. Itis important, therefore, to store recorded video on a PC orsome other storage media before modifying recordingareas.z The capacity of each hard disk can be checked using the screen. (JP.117, 119)Displaying the recording areasEXIT/OSDMENU(1) Displays the totalcapacity of the hard disk.(2) Displays the internalhard disk capacity.(3) Displays the expansionunit hard disk capacity.(4) Sets the capacity of therecording areas.(5) Displays the capacity ofthe archive areaTOTAL CAPACITY : 1200GBINTERNAL HDD : 500GBEXTERNAL HDD : 700GBRECORDING AREA : 80 %AREA FULL RESET ->ARCHIVE AREA : 20 %AREA FULL RESET ->CAUTION: WHEN THE AREA SETTING IS CHANGED,THE WHOLE AREA WILL BE INITIALIZED !(1)(3)(4)(5)(2)RecordingareaArchivearea