102EnglishRECORD SET2INTRODUCTIONSETTINGSNETWORKCONTROLNETWORKSETTINGSNETWORKOPERATIONOTHEROPERATION16Turn the jog dial to select the “MODE”setting and then turn the shuttle dialclockwise.The cursor moves to the top left sensor.[Settings] (indicates default setting)17Use the same procedure to set “LEVEL”and “MODE” for “T-2” through “T-4”.zMotion sensor positions are common for “T-1” through “T-4” and different settings cannot be made.18Turn the shuttle dial counter-clockwise.Motion sensor settings are confirmed and the MODE SET> screen is displayed once again.To stop motion sensor recordingPress the [MENU] button and select “2.RECORD SET”, “7.ALARM REC MODE SET”, and “MOTION SENSOR” andwhen the motion sensor settings screen appears set “LEVEL”to “OFF”.zThe sensitivity level can be checked on the setting screen.When motion is detected, the sensor color changes fromgreen to red, and a buzzer is sounded. When “C” isselected in “MODE” the buzzer is sounded.If detection is too sensitive, an alarm can be triggered evenby slight changes in lighting; accordingly, the sensitivitylevel should be set to match the camera location.zThe period for “T-1” through “T-4” as set in step 12changes to that of “TIME PERIOD A” or “TIME PERIOD B”on the Use the following procedure to display the main monitor andmonitor 2 when an alarm is detected.1Press the [MENU] button.The MENU indicator lights up and the isdisplayed.2Turn the jog dial to select “2.RECORDSET” and then turn the shuttle dialclockwise.The screen is displayed.SettingDescriptionAThe motion sensor alarm is triggered when amoving object is detected in A.BThe motion sensor alarm is triggered when amoving object is detected in B.A AND BThe motion sensor alarm is triggered when amoving object is detected by a sensor in both Aand B.A AND NBBy setting A to important points (moving objects)and B to non-moving points, the motion sensoralarm is not triggered when the overall screenbrightness changes. The motion sensor alarmonly activates when A experiences a changeand B does not.A TO BThe motion sensor alarm is triggered when anobject is detected moving from A to B. (within 2seconds from A to B)B TO AThe motion sensor alarm is triggered when anobject is detected moving from B to A. (within 2seconds from B to A)CA motion sensor alarm is triggered when theentire image changes uniformly. In this way,sprays and other similar measures can beprotected against. (No sensor settings areneeded for this mode.)CH01T-1LEVEL : OFFMODE : AASetting alarm operation and displayCH01T-1LEVEL : OFFMODE : AAMENU
