130 EnglishSCREEN SET4INTRODUCTION SETTINGS NETWORKCONTROLNETWORKSETTINGSNETWORKOPERATIONOTHEROPERATION10 Turn the jog dial to select “1S” to “30S”or “OFF” and then turn the shuttle dialclockwise.After confirming this setting, the cursor moves one position tothe right.[Settings] ( indicates default setting)11 Use the same procedure to set otherchannels.12 Press the [EXIT/OSD] button.The setting is completed and the display returns to the normalscreen.z When setting a number of time periods together, use thejog dial to move the cursor to the next period aftercompleting step 11, and repeat steps 9 through 10.z The time period for “T-1” through “T-4” changes to that of“TIME PERIOD A” or “TIME PERIOD B” on the PERIOD SET> screen.Use the following procedure to set video from a specificcamera (including playback video) to be masked by a graypattern when it is not to be shown on a monitor screen.Example: Preventing the display of specific camera videoat a set period (as indicated by TIME PERIOD A and TIMEPERIOD B).1 Make timer settings for “TIME PERIODA” and “TIME PERIOD B” on the PERIOD SET> screen. (JP.69)Specify “TIME PERIOD A” and “TIME PERIOD B”.2 Press the [MENU] button.The MENU indicator lights up and the isdisplayed.3 Turn the jog dial to select “4.SCREENSET” and then turn the shuttle dialclockwise.The screen is displayed.4 Turn the jog dial to select “MASK” andthen turn the shuttle dial clockwise.“OFF” flashes.Setting DescriptionOFF Channel not displayed. 1S - 30S Switching interval (seconds)TIME PERIOD : T-1 (09:00 - 12:00)CH 01 02 03 04 05 06 07 08MAIN MON. 1S 1S 1S 1S 1S 1S 1S 1SMON. 2 1S 1S 1S 1S 1S 1S 1S 1SCH 09 10 11 12 13 14 15 16MAIN MON. 1S 1S 1S 1S 1S 1S 1S 1SMON. 2 1S 1S 1S 1S 1S 1S 1S 1SEXIT/OSDSetting masks0104MENU1.MULTI SCREEN : NORMALQUAD POSITION SET ->MULTI 9 POSITION SET ->MULTI 16 POSITION SET ->2.SEQUENCE SETFULL : 1S QUAD : 1SMAIN/MON.2 MONITOR SET ->3.MASK : OFFMASK SET ->4.COLOR LEVEL SET ->
