| 
104 EnglishRECORD SET2INTRODUCTION SETTINGS NETWORKCONTROLNETWORKSETTINGSNETWORKOPERATIONOTHEROPERATION[Settings] ( indicates default setting)*1 Multi screen display is laid out according to the settings onP.126. Therefore, the image for the channel for which analarm was detected may not be displayed depending onthe settings when multi 9 screen display is selected.Special care should be taken.8 Turn the shuttle dial clockwise.“LAST” flashes.9 Turn the jog dial to select the “ALARMPRIORITY” setting and then turn theshuttle dial clockwise.The cursor moves to “MON.2 DISPLAY”.[Settings] ( indicates default setting)z After an alarm duration has ended, the display returns tothe screen prior to the alarm.z “ALARM PRIORITY” cannot be selected when “MAINMON. DISPLAY” is set to “9”, “16” or “NC”.10 Turn the shuttle dial clockwise.“NC” flashes.11 Turn the jog dial to select the “MON.2DISPLAY” value and then turn theshuttle dial clockwise.[Settings] ( indicates default setting)12 Press the [EXIT/OSD] button.The setting is completed and the display returns to the normalscreen.Setting DescriptionFULLWhen an alarm is detected, the main monitordisplays in full screen format the video on thechannel containing the alarm.9 *1 When an alarm is detected, the main monitordisplays multi 9 screens.16 When an alarm is detected, the main monitordisplays multi 16 screens.NC The display on the main monitor does not changewhen an alarm is detected.Setting DescriptionLASTWhen a number of alarms occur, the mostrecent alarm video is given priority and isdisplayed.FIRSTWhen a number of alarms occur, only thevideo for the first alarm is displayed.However, if the duration for the first alarmexpires, video for the next alarm isdisplayed.SWITCHWhen a number of alarms occur, thedisplay switches between the video fromthe corresponding cameras, showing eachfor one second.ALARM RETRIGGER : ONMAIN MON. DISPLAY : FULLALARM PRIORITY : LASTMON.2 DISPLAY : NCALARM RETRIGGER : ONMAIN MON. DISPLAY : FULLALARM PRIORITY : LASTMON.2 DISPLAY : NCSetting DescriptionNC When an alarm is detected, Monitor 2 doesnot change.FULLWhen an alarm is detected, the image ofthe channel that received the alarm isdisplayed full screen on Monitor 2.9 When an alarm is detected, Monitor 2appears in multi 9 screen display.16 When an alarm is detected, Monitor 2appears in multi 16 screen display.ALARM RETRIGGER : ONMAIN MON. DISPLAY : FULLALARM PRIORITY : LASTMON.2 DISPLAY : NCALARM RETRIGGER : ONMAIN MON. DISPLAY : FULLALARM PRIORITY : LASTMON.2 DISPLAY : NCEXIT/OSD |
