6Basic OperationFor detailed functions of each menu, see “Menu Tree” on pages 75-77.①ÇÉÑÖÜáàMain Menu Sub-MenuâäÉ Image selectFor computer source, used to select an image level among Dynamic, Standard, Real, and Image 1-10 (p.40).For Video source, used to select an image level among Dynamic, Standard, Natural, Cinema, and Image 1-10 (p.46).Ñ Image adjustFor computer source, used to adjust the computer image. [Contrast/Brightness/Color temp /White balance (R/G/B)/Offset(R/G/B)/Sharpness/Gamma/Reset/Store] (pp.41-42).For Video or HDMI source, used to adjust the video image. [Contrast/Brightness/Color/Tint/Color temp /Whitebalance (R/G/B)/Offset (R/G/B)/Sharpness/Gamma/Noise Reduction/Progressive/Reset/Store] (pp.47-48).Ç PC adjustUsed to adjust the parameters to match with the input signal format (pp.37-39).Ö ScreenFor computer source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/True/Custom/Custom adj /Digital zoom +/-/Keystone/Ceiling/Rear/Screen aspect/Reset] (pp.42-44).For video or HDMI source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/Natural Wide/Custom/Custom adj /Keystone/Ceiling/Rear/Screen aspect/Reset] (pp. 49-50).① InputUsed to select an input source (Input 1, Input , Input ) (p.33).Ü SoundUsed to adjust the volume or mute the sound (p.28).à InformationDisplay the input source information: Input, H-sync freq , V-sync freq , Screen, Language, Lamp status, Lamp counter,Filter counter, Power management, Key lock, PIN code lock, Simple mode, Remote control, and SERIAL NO (p.27).ä GuideThe key operation is displayed.á SettingUsed to set the projector’s operating configurations (pp.51-64).â NetworkSee the owner’s manual of “Network Set-up and Operation”.Menu Bar