Sanyo PJLINK PLC-WM4500 Owner's Manual

Also see for PLC-WM4500: User manual Owner's manual Owner's manual Manual Manual

Contents

6Computer InputPC System MenuPC System Menu1PC system can also be selected manually.The PC System MenuSelected system isdisplayed.Press the MENU button to display the On-Screen Menu. Usethe Point pq buttons to select Input and then press the Pointu or the SELECT button.Use the Point pq buttons to select Systerm and then pressthe Point u or the SELECT button.Use the Point pq buttons to select the desired system andthen press the SELECT button.Systems in this dialog boxcan be selected.Customized Mode (1-10) set inthe PC adjust Menu (pp.38-39).This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC adjustment. If acomputer is selected as a signal source, this projector automatically detects the signal format and tunes to project a properimage without any additional settings. (Signal formats provided in this projector are shown on pages 81-82)One of the following messages may appear when:The projector cannot recognize the connected signalconforming to the provided PC Systems. Auto isdisplayed on the System Menu box and the Auto PCadjustment function works to display proper images.If the image is not projected properly, a manualadjustment is required (pp.38-39).There is no signal input from the computer. Check theconnection between your computer and the projector.(See “Troubleshooting” on pp.72-74.)Auto-----The preset system is manually adjusted in the PCadjust Menu. The adjusted data can be stored in Mode1-10 (pp.38-39).Mode 1PC Systems provided in this projector is chosen. Theprojector chooses a proper system provided in theprojector and displays it.SVGA 1*Mode 1 and SVGA 1 are examples.Computer System SelectionAutomatic Multi-Scan SystemSelecting Computer System Manually