Sanyo PJLINK PLC-WM4500 Owner's Manual

Also see for PLC-WM4500: User manual Owner's manual Owner's manual Manual Manual

Contents

49Video Input1Press the MENU button to display the On-Screen Menu. Usethe Point pq buttons to select Screen and then press thePoint u or the SELECT button.Use the Point pq buttons to select the desired itemand then press the SELECT button.Screen Size AdjustmentPNote:• When no signal is detected, Normal is set automaticallyand the Aspect dialog box disappears.• The adjustable range for Scale H/V and Position H/Vare limited depending on the input signal.• Natural wide cannot be selected when 720p, 1035i,1080i or 1080p is selected on AV System Menu (p.45).Custom adjProvide the image within a screen size keeping its original aspectratio.Provide the image at the 16:9 wide screen ratio.NormalWide(16:9)Custom adjScale the image proportionally to fit the entire screen. Either side ofimage may go over the screen.Provide the image to fit full screen size.FullExpand the right and left side of images naturally without changingthe center areas.Natural WideZoomCustomProvide the last stored aspect screen image.Adjust the screen scale and position manually with this function.Press the Point u button at Custom adj. and the Custom adjustmentmenu is displayed on the screen, you can use the Point pq buttonsto choose the item you want to adjust.Scale H/V ............. Adjust the Horizontal/Vertical screen scale.H&V ...................... When set to On, the aspect ratio is fixed.Scale V appears dimmed and becomesunavailable. Adjust Scale H, then the screenscale is automatically modified based on theaspect ratio.Position H/V...........Adjust the Horizontal/Vertical screen position.Common .............. Save the adjusted scale or position to all theinputs. Press the SELECT button at Commonto display a confirmation box. To save thescale or position, press the SELECT button at"Yes", When Custom is selected, the savedscale or position is used.Reset ................... Reset all the adjusted values. Press theSELECT button at Reset to display aconfirmation box. To reset, press the SELECTbutton at yes.