Sanyo PJLINK PLC-WM4500 Owner's Manual

Also see for PLC-WM4500: User manual Owner's manual Owner's manual Manual Manual

Contents

7The following lens operation can be made with the Lens button onthe side control.Press the LENS button to enter each lens operation mode. Theselected adjustment display appears on the screen.Display Lens shift on the screen. Use the Point pqt ubuttons to position the screen to the desired point without havingpicture distortion.The screen can be moved up or down to 60 percent, or sidewaysup to 10 percent from the central axis of the lens shift.Press and hold the LENS button on the side control or the LENSSHIFT button on the remote control for 5 seconds or more toreturn the lens to the center position, after that the four whitearrows on the screen turn to red.Lens Shift AdjustmentPNote:• The arrow disappears at the maximum lens shift in eachdirection.• The arrow turns red when the lens shift comes to thecenter position of the screen.Display Zoom on the screen. Use the Point pq buttons tozoom in and out the image.Zoom AdjustmentDisplay Focus on the screen. Use the Point pq buttons toadjust focus of the image.Focus AdjustmentSide ControlLens OperationZoomZoom " Focus " Lens Shift " • • • • •Basic OperationINFO buttonLENS buttonPOINT buttonsFocusLens shiftOperating with Projector ControlÔÔÔINFO buttonInformation display can be used to confirm the current operatingcondition of the projector and the signal being projected throughthe projector.Press the INFO. button on the remote control to display theinformation window on the screen. To hide the informationwindow, press the INFO. button again or press the MENU button.The information window can also be selected from themenu.Information MenuPNote:• The H-sync freq. and V-sync freq. values described in thefigure may be different from the actual values.• SERIAL NO. is used to service the projector.