Sanyo PJLINK PLC-WM4500 Owner's Manual

Also see for PLC-WM4500: User manual Owner's manual Owner's manual Manual Manual

Contents

471Press the Point t button to decrease the contrast; press the Pointu button to increase the contrast (from 0 to 63).Press the Point t button to decrease the brightness; press thePoint u button to increase the brightness (from 0 to 63).Press the Point t button to lighten red tone; press the Point ubutton to deepen red tone (from 0 to 63).Press the Point t button to lighten green tone; press the Point ubutton to deepen green tone (from 0 to 63).Press the Point t button to lighten blue tone; press the Point ubutton to deepen blue tone (from 0 to 63).Use the Point t u buttons to select the desired Color temp. level(XLow, Low, Mid or High).Press the Point t button decrease the intensity of the color; pressthe Point u button increase the intensity of the color (from 0 to 63).Press the Point t u buttons to adjust the tint value to get a propercolor balance (from 0 to 63).PNote:• When White balance Red, Green or Blue is adjusted, the Color temp. level will change to Adj.• Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p.45).Image adjust MenuSelected Image modePress the MENU button to display the On-Screen Menu. Usethe Point pq buttons to select Image adjust and then pressthe Point u or the SELECT button.Use the Point pq buttons select the desired item and thenpress the SELECT button to display the adjustment dialogbox. Use the Point t u buttons to adjust the setting value.Use the Point t ubuttons to adjust thesetting value.Video InputImage AdjustmentContrastBrightnessColorTintColor tempWhite balance (Green)White balance (Red)White balance (Blue)