Sanyo PJLINK PLC-WM4500 Owner's Manual

Also see for PLC-WM4500: User manual Owner's manual Owner's manual Manual Manual

Contents

4Computer InputAdjust the screen scale and position manually with this function.Press the Point u button or the SELECT button at Custom adjand Custom adj is displayed on the screen, you can use the Pointpq buttons to choose the item you want to adjust.Scale H/V ............. Adjust the Horizontal/Vertical screen scale.H&V ...................... When set to On, the aspect ratio is fixed.Scale V appears dimmed and becomesunavailable. Adjust Scale H, then the screenscale is automatically modified based on theaspect ratio.Position H/V ........ Adjust the Horizontal/Vertical screen position.Common .............. Save the adjusted scale to all the inputs.Press the SELECT button at Common todisplay a confirmation box. To save the scale,press the SELECT button at yes. WhenCustom is selected, the saved scale is used.Reset ................... Reset the all adjusted values. Press theSELECT button at Reset to display aconfirmation box. To reset, press the SELECTbutton at yes.PNote:• When no signal is detected, Normal is set automaticallyand the Aspect dialog box disappears.• The adjustable range for Scale H/V and Position H/V islimited depending on the input signal.Custom adjCustom adjSelect Digital zoom +. The On-Screen Menu disappears and D zoom+ appears. Press the SELECT button to expand the image size. Usethe Point pqt u buttons to pan the image. The Panning functioncan work only when the image is larger than the screen size.You can also enter the Digital zoom + mode by pressing the D.ZOOMbutton on the remote control.You can also enter the Digital zoom - mode by pressing the D.ZOOMbutton on the remote control.Select Digital zoom – . The On-Screen Menu disappears and D zoom– appears. Press the SELECT button to compress image size.The projected image can be also compressed by pressing the D.ZOOMbutton on the remote control.To return to the previous screen size, select a screen size from theScreen Size Adjustment Menu or select an input source from theInput Source Selection Menu (see pages 33-35) again or adjustthe screen size with the D.ZOOM button.PNote:• The panning function may not operate properly if thestored Mode in the PC adjust Menu is used (p.39).• The minimum compression ratio is limited dependingon the input signal, when the Keystone function isworking or when the custom is selected for the screensize.• True and Digital zoom +/– cannot be selected when480i, 575i, 480p or 575p is selected in the PC SystemMenu (p.36).• Digital zoom +/- cannot be selected when True isselected.• Digital zoom – cannot be operated when Custom isselected.Digital zoom +Digital zoom -