41Computer InputImage adjust MenuPress the MENU button to display the On-Screen Menu.Use the Point pq buttons to select Image adjust andthen press the Point u or the SELECT button.1 Use the Point pq buttons to select the desired itemand then press the SELECT button to display theadjustment dialog box. Use the Point t u buttons toadjust the setting value.PNote:When White balance Red, Green or Blue isadjusted, Color temp. will change to Adj..Press the Point t button to decrease the contrast; press the Pointu button to increase the contrast (from 0 to 63).Press the Point t button to decrease the brightness; press thePoint u button to increase the brightness (from 0 to 63).Press the Point t button to lighten red tone; press the Point ubutton to deepen red tone (from 0 to 63).Press the Point t button to lighten green tone; press the Point ubutton to deepen green tone (from 0 to 63).Press the Point t button to lighten blue tone; press the Point ubutton to deepen blue tone (from 0 to 63).Use the Point t u buttons to select the desired Color temp. level(XLow, Low, Mid or High).Use the Point t u buttons to adjust the gamma value to obtain abetter balance of contrast (from 0 to 15).Press the Point t button to decrease the sharpness of the image;press the Point u button to increase the sharpness of the image(from 0 to 31).Use the Point t ubuttons to adjust thesetting value.Selected Image modePress the Point t button to lighten red/green/blue tone of the blacklevel of an image; press the Point u button to deepen red/green/blue tone of the black level of an image.Image AdjustmentContrastBrightnessColor tempWhite balance (Red)White balance (Green)White balance (Blue)Offset(Red/Green/Blue)SharpnessGamma