Sanyo PLC HF10000L Owner's Manual

Contents

7Basic OperationFor detailed functions of each menu, see “Menu Tree” on pages 82-84.Main Menu Sub-Menue Image selectFor computer source, used to select an image level among Dynamic, Standard, Real, and Image 1-10 (p.39).For Video source, used to select an image level among Dynamic, Standard, Cinema, and Image 1-10 (p.47).r Image adjustFor computer source, used to adjust the computer image. [Contrast/Brightness/Color management/Color temp./White balance (R/G/B)/Offset(R/G/B)/Auto picture control/Advanced color/Sharpness/Gamma/Reset/Store](pp.40-42).For video or HDMI source, used to adjust the video image. [Contrast/Brightness/Color/Tint/Color management/Color temp./White balance (R/G/B)/Offset (R/G/B)/Auto picture control/Advanced color/Sharpness/Gamma/Noise Reduction/Progressive/Reset/Store] (pp.48-50).w PC adjustUsed to adjust the parameters to match with the input signal format (pp.36-38).t ScreenFor computer source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/True/Custom/Customadj./Digital zoom +/-/Keystone/Ceiling/Rear/Screen aspect/Reset] (pp.43-45).For video or HDMI source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/Naturalwide/Custom/Custom adj./Keystone/Ceiling/Rear/Screen aspect/Reset] (pp. 51-52).q InputUsed to select an input source (Input 1, Input 2, Input 3, or Input 4) (p.32-34).u InformationDisplay s the input source information: Input, H-sync freq., V-sync freq., Screen, Lamp mode, Lamp control, Lampinterval, Lamp 1, Lamp , Language, Filter counter, Power management, Key lock, PIN code lock, Shuttermanagement, Remote control, SERIAL NO., and Option control No. (p.29).o GuideThe key operation is displayed.y SettingUsed to set the projector’s operating configurations (pp.53-68).i NetworkSee the owner’s manual of “Network Set-up and Operation”.Main Menuqwertyuio