Sanyo PLC HF10000L Owner's Manual

Contents

4To reset the adjusted data, select Reset and press theSELECT button. A confirmation box appears and then selectYes. All adjustments will return to their previous figures.To store the adjusted data, select Store and press thePoint 8 or the SELECT button. Use the Point ed buttonsto select one from Image 1 to 10 and press the SELECTbutton.A confirmation box appears and then select Yes. Stored datacan be called up by selecting an Image (1-10) in the ImageMode Selection on page 39.Use the Point 7 8 buttons to adjust the gamma value toobtain a better balance of contrast (from 0 to 15).Press the Point 7 button to decrease the sharpness of theimage; press the Point 8 button to increase the sharpnessof the image (from 0 to 31).A confirmation box appears and then select Yes.Computer InputUse the Point 7 8 buttons to select the desired Auto picturecontrol option (Off, L1 or L2).Off . . . . Auto picture control OFF position.L1 . . . . . Auto picture control LEVEL 1 position.L2 . . . . . Auto picture control LEVEL 2 position.Use the Point 7 8 buttons to select the advanced color mode.Off . . . . Advanced color mode is “Off”.Auto . . . Advanced color according to the type of image .*This function controls the operation of the Color ControlDevic, which independently and automatically regulates theamount of yellow light passing through the LCD panel, toaccurately reproduce both image color and image brightness.Normally leave Auto (default setting).✔Note:• White balance may change depending on the image.Auto picture controlAdvanced color*SharpnessGammaResetStorePress the Point 7 button to lighten red/green/blue toneof the black level of an image; press the Point 8 button todeepen red/green/blue tone of the black level of an image.Offset (Red/Green/Blue)