Sanyo PLC HF10000L Owner's Manual

Contents

49✔Note• When White balance Red, Green or Blue is adjusted, theColor temp. level will change to Adj..• Tint cannot be selected when the video system is PAL,SECAM, PAL-M or PAL-N (p.46).Press the Point 7 button to lighten red/green/blue toneof the black level of an image; press the Point 8 button todeepen red/green/blue tone of the black level of an image(from 0 to 63).Use the Point 7 8 buttons to select the desired Auto picturecontrol option (Off, L1 or L2).Off . . . . Auto picture control OFF position.L1 . . . . . Auto picture control LEVEL 1 position.L2 . . . . . Auto picture control LEVEL 2 position.Use the Point 7 8 buttons to select the advanced color mode.Off . . . . Advanced color mode is “Off”.Auto . . . Advanced color according to the type of image .*This function controls the operation of the Color ControlDevice, which independently and automatically regulates theamount of yellow light passing through the LCD panel, toaccurately reproduce both image color and image brightness.Normally leave Auto (default setting).✔Note:• White balance may change depending on the image.Video InputAuto picture controlAdvanced color*SharpnessGammaOffset (Red/Green/Blue)Use the Point 7 8 buttons to adjust the gamma value toobtain a better balance of contrast (from 0 to 15).Press the Point 7 button to decrease the sharpness of theimage; press the Point 8 button to increase the sharpnessof the image (from 0 to 31).