Sanyo PLC HF10000L Owner's Manual

Contents

57SettingsThis function allows multiple projector images to be seamlesslyoverlapped.When displaying multiple screens, eliminates the difference incolor between the images that are projected from the projectors.Use the Point ed buttons to select Edge blending and thenpress the SELECT button to display a dialog box. Use the Pointed7 8 buttons to adjust the setting value.On/Off . . . . . . . . Set to On to activate the Edge blendingfunction.Start. . . . . . . . . . The point at which edge blending starts.The edges of a green frame around animage shift in accordance with the valuesspecified here. Specify a value in the 0- 1024 range for Left and Right and a valuein the 0 - 540 for Top and Bottom.Width. . . . . . . . . Adjusts the width of correction.Right/Left: Set the width. (from 0 to 1024).Top/Bottom: Set the width. (from 0 to 540).Black level . . . . . Adjusts the black level of projected image.All: The values of R, G, and B will bechanged simultaneously.R/G/B: Adjusts the value (up to ± 127).Test pattern . . . . Select On to display a suitable pattern(white: 50%).Menu off . . . . . . Closes the menu and hides all edge lines(in green, red, and gray) temporarily.Reset . . . . . . . . . Select Reset and press the SELECTbutton. Then Return to factory default ofEdge Blending? message appears . Toreset, press the SELECT button at [Yes].Back . . . . . . . . . . Hides the Edge blending setting menu andreturns to the Setting menu.✔Note:• The overlapping areas might become uneven dependingon the images. In such a case, it is recommended todecrease the contrast of the images in the Image AdjustMenu.• See “How to adjust multiple screens” on pages 69, 70 forfurther information.When multiple sets are used simultaneously, this projectorallows the user to correct the difference of colors among the sets.Use the Point ed buttons to select Color matching and thenpress the SELECT button to display a dialog box. Use the Pointed7 8 buttons to adjust the setting value.Color matching. . . . . . Set to ‘On‘ to activate the Color matchingfunction. When the color matching isset to Off, all items except for Advancedcolor matching and Back are displayed ingrayout and cannot be adjusted.Color adjustment . . . . Adjust s the color setting of Red/Green/Blue/White. The chromatic coordinate(X,Y) of Red, Green, Blue, and White canbe adjusted respectively. The adjustablerange is from 0.000 to 1.000.Auto test pattern . . . . Select On to display a suitable patternwhen setting items.Color matchingEdge blending