Sanyo PLC HF10000L Owner's Manual

Contents

5AppendixIndicators and Projector ConditionCheck the indicators for the projector condition.The projector is operating normally.• • • on• • • off• • • blinking at the normal rate(approx. 1 second ON,1 second OFF)• • • dim• • • blinking slow(approx. 2 seconds ON,2 seconds OFF)• • • blinking fast(approx. 0.5 seconds ON,0.5 seconds OFF)IndicatorsProjector ConditionPOWERgreenLAMPredWARNINGTEMP.redWARNINGFILTERorangeSHUTTERblueLAMP 1/2REP.orangeThe projector is off. (The main On/Off switch is OFFposition or the AC power cord is unplugged.)The projector is in stand-by mode. Press the ON/STAND-BY button to turn on the projector.The projector is operating normally.(The Shutter is open)The projector is operating normally.(The Shutter is closed)The projector is preparing for stand-by or theprojection lamp is being cooled down. The projectorcannot be turned on until cooling is completed andthe POWER indicator lights green.The projection lamp is being cooled down in thePower management mode.The projector is in the Power management mode.The projection lamp is being cooled down in theShutter management mode.The projector is in the Shutter management mode.Press the ON/STAND-BY button to turn on theprojector.The filter is scrolled using the FILTER button onthe remote control or the Filter control function inthe setting menu. When the filter is being scrolled,the Filter replacement icon and “Please wait...”message (Fig. 1) appear on the screen.✽✽✽✽Fig.1 Filter replacement icon and “Please wait...”✽✽✽✽✽ ✽✽✽✽✽✽✽✽✽✽✽✽ • • • Differs according to conditions.✽