5Computer InputPC System MenuPC System Menu1PC system can also be selected manually.Selected system isdisplayed.Press the MENU button to display the on-screen menu.Use the Point ed buttons to select Input and thenpress the Point 8 or the SELECT button.Use the Point ed buttons to select System and thenpress the Point 8 or the SELECT button.Use the Point ed buttons to select the desired systemand then press the SELECT button.Systems in this dialog boxcan be selected.Customized Mode (1-10) set in the PC adjustmenu (pp.37, 38).This projector automatically tunes to various types of computers with its Multi-scan system and Auto PCadjustment. If a computer is selected as a signal source, this projector automatically detects the signal formatand tunes to project a proper image without any additional settings. (Signal formats provided in this projectorare shown on pages 88-90)When the projector cannot recognize theconnected signal conforming to the providedPC Systems, Auto is displayed on the SystemMenu box and the Auto PC adjustment functionworks to display proper images. If the image isnot projected properly, a manual adjustment isrequired (pp.37, 38).There is no signal input from the computer.Check the connection between your computerand the projector. (See “Troubleshooting” onpp.79-81.)Auto-----The preset system is manually adjusted in the PCadjust menu. The adjusted data can be stored inMode 1-10 (pp.37, 38).Mode 1PC Systems provided in this projector is chosen.The projector chooses a proper system providedin the projector and displays it.SVGA 1*Mode 1 and SVGA 1 are examples.Computer System SelectionAutomatic Multi-Scan SystemSelecting Computer System ManuallyOne of the following messages may appear when: