77Maintenance and CareTurn off the projector, press the Main On/Off Switch to Offand unplug the AC power cord from the AC outlet beforecleaning.Gently wipe the projection lens with a cleaning cloth thatcontains a small amount of non-abrasive camera lenscleaner, or use a lens cleaning paper or commerciallyavailable air blower to clean the lens.Avoid using an excessive amount of cleaner. Abrasivecleaners, solvents, or other harsh chemicals might scratchthe surface of the lens.Cleaning the Projector CabinetTurn off the projector, press the Main On/Off Switch to Offand unplug the AC power cord from the AC outlet beforecleaning.Gently wipe the projector body with a soft dry cleaningcloth. When the cabinet is heavily soiled, use a small amountof mild detergent and finish with a soft dry cleaning cloth.Avoid using an excessive amount of cleaner. Abrasivecleaners, solvents, or other harsh chemicals might scratchthe surface of the cabinet.When the projector is not in use, put the projector in anappropriate carrying case or cover to protect it from dust andscratches.Cleaning the Projection LensCAUTIONDo not use any flammable solvents or air sprayson the projector and in its vicinity. The explosion orfire hazard may occur even after the AC power cordis unplugged because the temperature inside theprojector is extremely high due to the lamps.In addition, there is a risk that the internal partsmay be damaged not only by the flammable airspray but also by the cold air.