4Input SelectionWhen the video input signal is connectedto the Y, Pb/Cb, Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.When the video input signal is connectedto the VIDEO jack, select Video.When connecting to video equipment, select the type ofVideo source in the Source Select Menu.Videoy, Pb/Cb, Pr/CrWhen connecting to video equipment, select the type ofVideo source in the Source Select Menu.INPUT 1 MENUHDMIRGB(Scart)When scart video equipment is connected to the INPUT 1(ANALOG) terminal, select RGB (Scart).When the video signal is connected to the HDMI terminal,select HDMI.INPUT MENU1Press the MENU button to display the On-ScreenMenu. Use the Point ed buttons to select Input andthen press the Point 8 or the SELECT button.Use the Point ed buttons to select the desired inputand then press the Point 8 button to access thesubmenu items.Use the Point ed buttons to select the desiredsource and then press the SELECT button.Menu OperationWHEN SELECTING INPUT 1 (COMPUTER INPUTTERMINALS )WHEN SELECTING INPUT (5 BNC INPUT jACKS )✔Note:• When the video input signal is connected to the Y-Pb/Cb-Pr/Cr jacks, Y,Pb/Cb,Pr/Cr takes precedence of RGB.• Y,Pb/Cb,Pr/Cr input can accept the component signal andthe analog RGB signal. When analog RGB signal is notrecognized in Y,Pb/Cb,Pr/Cr input source, set to RGB inputmanually.RGB(AV HDCP)If the HDCP-compatible signal source is connected to theINPUT 1 (DIGITAL) terminal, select RGB (AV HDCP).When the video input signal is connected tothe S-VIDEO jack, select S-Video.S-VideoVideo Input Source SelectionRGB(PC digital)When your computer is connected to INPU T 1 (DIGITAL)terminal, select RGB (PC digital).