PLC-WU3800 Expand Serial Command Functional Specifications26/748.6.2 CF_SOURCE CommandCommand “CF_SOURCE_%1”[CR]%1Input isComputer 1“ANALOG” --------- Select Analog Input“YPBPR” ----------- Select Component Input“SCART” ----------- Select Scart Input”UP” ---------------- Switch Input as followsAnalog →YPBPR →Scart →…”DN” ---------------- Switch Input as followsScart →YPBPR →Analog →…Input isComputer 2““ANALOG” --------- Select Analog Input”UP””DN”Although no operation is made, projector accepts parameter ”UP”/”DN”Input is HDMI“HDMI” ----------- Select HDMI Input”UP””DN”Although no operation is made, projector accepts parameter ”UP”/”DN”Input is Video“VIDEO” ------------- Select Composite Video Input”UP””DN”Although no operation is made, projector accepts parameter ”UP”/”DN”Input isS-videoS-VIDEO ------------- Select S-video Input”UP””DN”Although no operation is made, projector accepts parameter ”UP”/”DN”DetailsSelect Source of currently selected InputWhen Input specified by %1 is inappropriate for selected Input, the projectorreturns “101” and the command is not executed.This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.6.3 CF_INPUT1 CommandCommand “CF_INPUT1_%1_”[CR]%1“ANALOG” ---------- Select Analog RGB Input“YPBPR” ------------- Select Component“SCART” ------------- Select SCARTDetails Select Input - Computer 1 and source specified in %1 at once.This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]