Sanyo PLC-WU3800 Manual
Also see for PLC-WU3800: Dimensional drawingManualCommand listSpecification sheetOwner's manual
                                                                          | |
Contents
|
PLC-WU3800 Expand Serial Command Functional Specifications27/748.6.4 CF_INPUT2 CommandCommand “CF_INPUT2_%1_”[CR]%1 “ANALOG” ---------- Select Analog RGB InputDetailsSelect Input - Computer 2 and source specified in %1 at once.This command is available in normal Power ON status.Projector returns “101” by selecting Computer 2 while Monitor out is selected inTerminal menu.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.6.5 CF_INPUT3 CommandCommand “CF_INPUT3_%1_”[CR]%1 “HDMI” ------------------ Select HDMIDetails Select HDMI Input and source specified in %1 at once.This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.6.6 CF_INPUT4 CommandCommand “CF_INPUT4 _%1”[CR]%1 “VIDEO” ----------------- Select Composite video InputDetails Select Video input and source specified in %1 at once..This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.6.7 CF_INPUT5 CommandCommand “CF_INPUT5 _%1”[CR]%1 “S-VIDEO” ----------------- Select S-video InputDetails Select S-video input and source specified in %1 at once..This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.6.8 CF_INPUT_%1_%2 CommandCommand “CF_INPUT_%1_%2”[CR]%1“COMPUTER1” ------ Select Computer1 Input“COMPUTER2” ------ Select Computer2 Input“HDMI” ------------------ Select HDMI Input“VIDEO” ---------------- Select Video Input“S-VIDEO” ------------- Select S-video Input%2When %1 is COMPUTER1ANALOG” ----- Select Analog RGB Input“YPBPR” -------- Select Component Input“SCART” -------- Select SCART InputWhen %1 is COMPUTER2 |
Related manuals for Sanyo PLC-WU3800
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine