PLC-WU3800 Expand Serial Command Functional Specifications61/749.9 Lamp Status Read Command9.9.1 CR_LAMPREPL CommandCommand “CR_LAMPREPL”[CR]Details Get information of Lamp Replacement timeResponseAcceptable “000_%1”[CR]%1“1Y” -------------------------- Over lamp replacement time“1N” -------------------------- Within lamp replacement time“1” means the number of lamps.(1 lamp model→ “1”)“Y”/”N” means if it has reached its replacement time or not.e.g. “1Y” -----------projector is 1 lamp model and Lamp is over itsreplacement timeUnacceptable “Error code”[CR]9.9.2 CR_LAMPH CommandCommand “CR_LAMPH”[CR]Details Get total running time of lamp by hour (h)*Actual running time, not corresponding valueResponseAcceptable “000_%1”[CR]%1 “00000”~“99999”Unacceptable “Error code”[CR]9.9.3 CR_LAMPCORRESPH CommandCommand “CR_LAMPCORRESPH”[CR]Details Get total running time of lamp by hour (h)* Corresponding value, not actual running timeResponseAcceptable “000_%1”[CR]%1 “00000”~“99999”Unacceptable Error code”[CR]9.9.4 CR_LAMPMODE CommandCommand “CR_LAMPMODE”[CR]Details Get setting status of Lamp ModeResponseAcceptable “000_%1”[CR]%1“HIGH” ------------------- Lamp Mode is High“NORMAL” -------------- Lamp Mode is Normal“ECO” -------------------- Lamp Mode is Eco“AUTO” ------------------ Lamp Mode is AutoUnacceptable “Error code”[CR]
