Sanyo PLC-WU3800 Manual

Also see for PLC-WU3800: Dimensional drawing Manual Command list Specification sheet Owner's manual

Contents

PLC-WU3800 Expand Serial Command Functional Specifications67/749.11.15 CR_PIPPOSITION CommandCommand “CR_PIPPOSITION” [CR]Details Get position of Subpicture in Picture in PictureResponseAcceptable “000_%1”[CR]%1“BTMRIGHT” -------------- Subpicture is Bottom right“BTMLEFT” ---------------- Subpicture is Bottom left“TOPRIGHT” -------------- Subpicture is Top right“TOPLEFT” ---------------- Subpicture is Top leftUnacceptable “Error code”[CR]9.11.16 CR_STANDBYMODE CommandCommand “CR_STANDBYMODE” [CR]Details Get Standby Mode setting statusResponseAcceptable “000_%a”[CR]%a “ECO” -------------- Eco Mode“NORMAL” -------- Network ModeUnacceptable “Error code”[CR]9.11.17 CR_P-MANE CommandCommand “CR_P-MANE”[CR]Details Get Power management setting statusResponseAcceptable “000_%a”[CR]%a“OFF” -------------------------- Power Management is OFF“READY” ---------------------- Power Management is Ready“SHUTDOWN” ---- Power Management is set to Shut Down modeUnacceptable “Error code”[CR]9.11.18 CR_P-MANETIME CommandCommand “CR_P-MANETIME”[CR]Details Get time to start Power ManagementResponseAcceptable “000_%a”[CR]%a “001”~”030” -----------------------1 minute to 30 minutesUnacceptable “Error code”[CR]9.11.19 CR_ON-STA CommandCommand “CR_ON-STA”[CR]Details Get Direct on setting statusResponseAcceptable “000_%a”[CR]%a “ON” -------------------------- Direct on is ON“OFF” ------------------------ Direct on is OFFUnacceptable “Error code”[CR]9.11.20 CR_CCAPTIONDISP CommandCommand “CR_CCAPTIONDISP”[CR]Details Get selected channel of Closed caption