Sanyo PLC-WU3800 Manual

Also see for PLC-WU3800: Dimensional drawing Manual Command list Specification sheet Owner's manual

Contents

PLC-WU3800 Expand Serial Command Functional Specifications69/74%1“LOCK” ------------- PJ Lock is in operation. PJ Lock status is ON-1or ON-2 on Menu, and PJ PIN CODE is notentered so that projector is actually locked.“FREE” ------------- PJ Lock is released. PJ Lock status is OFF, or,status is ON-1 or ON-2 on Menu but PJ PINCODE is entered correctly so that PJ Lock isreleased.Unacceptable “Error Code” [CR]9.11.26 CR_PJLOCKMENU CommandCommand “CR_PJLOCKMENU” [CR]Details Get status of PJ Lock on MenuResponseAcceptable “000_%1[CR]%1“ON1” ------------- PJ Lock status is On-1“ON2” ------------- PJ Lock status is On-2“OFF” ------------- PJ Lock status is OFFUnacceptable “Error Code” [CR]9.11.27 CR_FANMODE CommandCommand “CR_FANMODE”[CR]Details Get selected Fan modeResponseAcceptable “000_%a”[CR]%a “L1” ----------------------- Fan mode is L1“L2” ----------------------- Fan mode is L2Unacceptable “Error code”[CR]9.11.28 CR_FANCONTROL CommandCommand “CR_FANCONTROL”[CR]Details Get selected Fan control setting statusResponseAcceptable “000_%a”[CR]%a“OFF” ----------------------- Fan control is OFF“ON1” ----------------------- Fan control is ON1“ON2” ----------------------- Fan control is ON2“ON3” ----------------------- Fan control is ON3Unacceptable “Error code”[CR]9.11.29 CR_FILH CommandCommand “CR_FILH”[CR]Details Get Filter used timeResponseAcceptable “000_%1”[CR]%1 “00000”~”99999” ------------------- 0 hour to 99999 hoursUnacceptable “Error Code”[CR]9.11.30 CR_FILREPL CommandCommand “CR_FILREPL”[CR]Details Get the information of Filter replacement timeResponse Acceptable “000_%1”[CR]