PLC-XC50/55 Expand Serial Command Functional Specifications33/678.10 Setting Command8.10.1 CF_LANG CommandCommand “CF_LANG_%1”[CR]%1“ENG” --------------------------- Select English“DEU” --------------------------- Select German“FRA” --------------------------- Select French“ITA” ----------------------------- Select Italian“ESP” ---------------------------- Select Spanish“POR” --------------------------- Select Portuguese“NED” --------------------------- Select Dutch“SVE” --------------------------- Select Swedish“RUS” --------------------------- Select Russian“CHI” ---------------------------- Select Chinese“KOR” --------------------------- Select Korean“JPN” --------------------------- Select Japanese“FIN” ---------------------------- Select Finnish“POL” --------------------------- Select Polish“HUN” -------------------------- Select Hungarian“ROM” -------------------------- Select RomanianDetailsSet language for OSDThe language set by this command is stored in EEPROM and its setting iseffective after ALL is OFF.This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.10.2 CF_AUTOSETUPPCADJ CommandCommand “CF_AUTOSETUPPCADJ_%1”[CR]%1 “ON” ------------------- Set Auto PC ADJ. function to ON“OFF” ------------------ Set Auto PC ADJ. function to OFFDetailsSet/Cancel Auto PC adj. functionThis command is available in normal Power ON status.Note) Keystone, PC adj. and Input search cannot be set “Off” at one time. WhenKeystone and PC adj. status are Off, projector returns error code “101” byreceiving this command to turn OFF Auto PC adj..Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.10.3 CF_AUTOSETUPKEYSTONE CommandCommand “CF_AUTOSETUPKEYSTONE_%1”[CR]%1“AUTO” ------------------- Set Auto Keystone function to Auto“MANUAL” --------------- Set Auto Keystone function to Manual“OFF” --------------------- Set Auto Keystone function to OFFDetailsSet Keystone function of Auto setupThis command is available in normal Power ON status.Note) Keystone, PC adj. and Input search cannot be set “Off” at one time. WhenInput search and PC adj. status are Off, projector returns error code “101” byreceiving this command.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]