PLC-XC50/55 Expand Serial Command Functional Specifications34/678.10.4 CF_AUTOSETUP CommandCommand “CF_AUTOSETUPPCADJ_%1”[CR]%1 “START” ------------------- Execute Auto SetupDetails Execute Auto SetupThis command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.10.5 CF_INPUTSEARCH CommandCommand “CF_INPUTSEARCH_%1”[CR]%1“OFF” ------------------------- Set Input search operation to OFF“ON1” ------------------------- Set Input search operation to On1“ON2” ------------------------- Set Input search operation to On2DetailsSet Input search operation mode.The status set by this command is stored in EEPROM and its setting is effectiveafter ALL is OFFThis command is available in normal Power ON status.Note) Keystone, PC adj. and Input search cannot be set “Off” at the same time.When Keystone and PC adj. are Off, projector returns error code “101” byreceiving this command.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.10.6 CF_BBACK CommandCommand “CF_BBACK_%1”[CR]%1“ON” ----------------------------- Select Blue Back“OFF” ---------------------------- Cancel Blue Back“UP” ------------------------------ Switch setting (On -- Off – On…)“DN” ------------------------------ Switch setting (On -- Off -- On…)Note) “UP” and “DN” behave the same.DetailsSet / Cancel Blue BackThe value set by this command is stored in EEPROM and its setting is effectiveeven after ALL is OFF.This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.10.7 CF_DISP CommandCommand “CF_DISP_%1”[CR]%1“ON” ----------------------------- Select Display“OFF” --------------------------- Cancel Display“CNTDWNOFF” -------------- Count down OFF“UP” --------------- Switch Display mode in forward directionOn -- Count down OFF – Off -- On …“DN” --------------- Switch Display mode in backward directionOn -- Off -- Count down OFF – On…DetailsSet / Cancel DisplayThe value set by this command is stored in EEPROM and its setting is effectiveeven after ALL is OFF.This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]