Sanyo PLC-XC50 - 2600 Lumens Manual

Also see for PLC-XC50 - 2600 Lumens: Owner's manual Manual Specification sheet Owner's manual

Contents

PLC-XC50/55 Expand Serial Command Functional Specifications58/679.11 Setting Status Read Command9.11.1 CR_LANG CommandCommand “CR_LANG”[CR]Details Get selected languageResponseAcceptable “000_%a”[CR]%a“ENG” -------------------------- English is selected“DEU” -------------------------- German is selected“FRA” -------------------------- French is selected“ITA” --------------------------- Italian is selected“ESP” -------------------------- Spanish is selected“POR” -------------------------- Portuguese is selected“NED” -------------------------- Dutch is selected“SVE” -------------------------- Swedish is selected“JPN” -------------------------- Japanese is selected“CHI” -------------------------- Chinese is selected“KOR” -------------------------- Korean is selected“RUS” -------------------------- Russian is selected“FIN” ---------------------------- Finnish is selected“POL” --------------------------- Polish is selected“HUN” -------------------------- Hungarian is selected“ROM” -------------------------- Romanian is selectedUnacceptable “Error Code”[CR]9.11.2 CR_AUTOSETUPPCADJ CommandCommand “CR_AUTOSETUPPCADJ” [CR]Details Get Auto PC adj. setting status in Auto setupResponseAcceptable “000_%a”[CR]%a “ON” ------------------ Auto PC ADJ. in Auto setup is ON“OFF” ----------------- Auto PC ADJ. in Auto setup is OFFUnacceptable “Error Code”[CR]9.11.3 CR_AUTOSETUPKEYSTONE CommandCommand “CR_AUTOSETUPKEYSTONE” [CR]Details Get Keystone setting status in Auto setupResponseAcceptable “000_%a”[CR]%a“AUTO” -------------- Auto Keystone is Auto“MANUAL” ---------- Auto Keystone is Manual“OFF” ---------------- Auto Keystone is OFFUnacceptable “Error Code”[CR]9.11.4 CR_INPUTSEARCH CommandCommand “CR_INPUTSEARCH”[CR]Details Get setting status of Input searchResponseAcceptable “000_%a”[CR]%a“OFF” --------------------- Input search is OFF“ON1” --------------------- Input search is On1“ON2” --------------------- Input search is On2Unacceptable “Error Code”[CR]