Sanyo PLC-XC50 - 2600 Lumens Manual

Also see for PLC-XC50 - 2600 Lumens: Owner's manual Manual Specification sheet Owner's manual

Contents

PLC-XC50/55 Expand Serial Command Functional Specifications62/67ResponseAcceptable “000_%1” [CR]%1 “09” = Remaining number of usable Filter scroll : 9 times“00” = Remaining number of usable Filter scroll : 0 timeUnacceptable “Error Code” [CR]9.11.21 CR_RCODE CommandCommand “CR_RCODE”[CR]Details Get selected Remote Control CodeResponseAcceptable “000_%a”[CR]%a“001” --------------------------- Code1 is selected“002” --------------------------- Code2 is selected“003” --------------------------- Code3 is selected“004” --------------------------- Code4 is selected“005” --------------------------- Code5 is selected“006” --------------------------- Code6 is selected“007” --------------------------- Code7 is selected“008” --------------------------- Code8 is selectedUnacceptable “?”[CR]9.11.22 CR_KEYDIS CommandCommand “CR_KEYDIS”(CR)Details Get disability status of RC/Projector keys (valid or invalid)ResponseAcceptable “000_%a”[CR]%a“NONE” -------------------------- RC / Projector keys are valid“RC” ------------------------------ RC keys are invalid“KEY” ----------------------------- Projector keys are invalidUnacceptable “?”[CR]9.11.23 CR_SECURITY CommandCommand “CR_SECURITY” [CR]Details Get Security Mode setting statusResponseAcceptable “000_%1[CR]%1 “ON” ------------- PJ Lock setting on Menu is ON-1 or ON-2“OFF” ------------PJ Lock setting on Menu is OFFUnacceptable “Error Code” [CR]9.11.24 CR_PJLOCKNOW CommandCommand “CR_PJLOCKNOW” [CR]Details Get if PJ lock is actually in operationResponseAcceptable “000_%1[CR]%1“LOCK” ------------- PJ Lock is in operation. PJ Lock status is ON-1or ON-2 on Menu, and PJ PIN CODE is notentered so that projector is actually locked.“FREE” ------------- PJ Lock is released. PJ Lock status is OFF, or,status is ON-1 or ON-2 on Menu but PJ PINCODE is entered correctly so that PJ Lock isreleased.Unacceptable “Error Code” [CR]