Sanyo PLC-XC50 - 2600 Lumens Manual

Also see for PLC-XC50 - 2600 Lumens: Owner's manual Manual Specification sheet Owner's manual

Contents

PLC-XC50/55 Expand Serial Command Functional Specifications60/679.11.10 CR_STANDBYMODE CommandCommand “CR_STANDBYMODE” [CR]Details Get Standby Mode setting statusResponseAcceptable “000_%a”[CR]%a “ECO” -------------- Eco Mode“NORMAL” -------- Normal ModeUnacceptable “Error Code” [CR]9.11.11 CR_P – MANE CommandCommand “CR_P-MANE”[CR]Details Get Power management setting statusResponseAcceptable “000_%a”[CR]%a“OFF” -------------------------- Power Management is OFF“READY” ---------------------- Power Management is Ready“SHUTDOWN” ------------- Power Management is set to ShutDown modeUnacceptable “Error Code” [CR]9.11.12 CR_P – MANETIME CommandCommand “CR_P-MANETIME”[CR]Details Get time to start Power ManagementResponseAcceptable “000_%a”[CR]%a “001”~”030” -----------------------1 minute to 30 minutesUnacceptable “Error Code” [CR]9.11.13 CR_ON-STA CommandCommand “CR_ON-STA”[CR]Details Get Power ON Start setting statusResponseAcceptable “000_%a”[CR]%a “ON” -------------------------- Power ON Start is ON“OFF” ------------------------ Power ON Start is OFFUnacceptable “Error Code” [CR]9.11.14 CR_CCAPTIONDISP CommandCommand “CR_CCAPTIONDISP”[CR]Details Get selected channel of Closed caption channelResponseAcceptable “000_%a”[CR]%a“OFF” ------------------------------ Closed caption is Off“CC1” ------------------------------ Channel CC1 is selected“CC2” ------------------------------ Channel CC2 is selected“CC3” ------------------------------ Channel CC3 is selected“CC4” ------------------------------ Channel CC4 is selectedUnacceptable “Error Code” [CR]