PLC-XC50/55 Expand Serial Command Functional Specifications50/679.7.5 CR_SRCINP3 CommandCommand "CR_SRCINP3” [CR]Details Get selected source of Input 3_VideoResponseAcceptable “000_%1”[CR]Request data“AUTO” -------------- Video Auto is selected“VIDEO” ------------- Composite Video Input is selected“S VIDEO” -------- S-Video Input is selectedUnacceptable “Error Code”[CR]9.7.6 CR_SYSTEM CommandCommand “CR_SYSTEM”[CR]Details Get selected SystemResponseAcceptable “000_%1”[CR]%1Input isPC Analog“VGA1” -------------- VGA1 is selected“VGA2” -------------- VGA2 is selected“XGA1”-------------- XGA1 is selected“WXGA3” --------- WXGA3 is selected“1080i” ------------ 1080i is selected“1035i” ------------ 1035i is selected“720p” ------------- 720p is selected“575p” ------------- 575p is selected“480p” ------------- 480p is selected“575i” -------------- 575i is selected“480i” -------------- 480i is selected“MODE1” ------- Mode1 is selected“MODE5” -------------- Mode5 is selectedWhen there is no signal, projector returns error code”101”[CR]Input isPC-Digital/AV-HDCP“D XGA1” ------------- D-XGA1 is selected“D WXGA3” ---------- D-WXGA3 is selected“D 1080I” ------------- D-1080i is selected“D 1035I” ------------- D-1035i is selected“D 720P” ------------- D-720p is selected“D 575P” ------------- D-575p is selected“D 480P” ------------- D-480p is selected“D 575I” -------------- D-575i is selected“D 480I” -------------- D-480i is selectedWhen there is no signal, projector returns error code”101”[CR]Input isY,Pb/Cb,Pr/Cr“AUTO” ----------- Auto is selected“1080i” ------------1080i is selected“1035i” ------------ 1035i is selected“720p” ------------- 720p is selected“575p” ------------- 575p is selected“480p” ------------- 480p is selected“575i” -------------- 575i is selected“480i” -------------- 480i is selectedProjector returns selected System status regardless of thesignal input.