110Chapter 8 Network capture functionsUnregister moderator status1. Select the projector(s) which is registered as a moderator from the moderator mode applicationwindow.2. Click the Delete moderator's group button. Selected projector will be unregistered on a moderator,and the application window changes "Normal mode". The column of status changes from "#OnModerating" to "On Standby". When there are multiple projectors to unregister, the applicationwindow maintains "Moderator mode" until all the registered moderator's groups are unregistered.3 Even after the moderator is unregistered, the application window of the Network Capture 5 appearson the screen to indicate that the moderator function is unregistered.3 After terminating the Network Capture 5, all the clients joined in the session will be unregistered.Moderator's password setting upThis enables you to set up the password to join in the moderator's group.Start up the network Capture 5 and click Parameter set up button on the application window. On the moderatorfunction setting item on the parameter set up window, set up the password of Moderator 's password. Up to 15characters can be used for the password. Default password is blank.Following password input window appears on the screen when the client clicks Join moderator's group button onthe application window to join in the moderator's group.Enter a password and click OK button. When the password is authenticated correctly, the client can join in themoderator's group. The input password is registered in the moderator's password of the client.
