4Memory Viewer functionNote: During accessing to the USB thumb drive, do not turn off the power or eject the USB thumb drivebecause the data in the USB thumb drive might get damaged. During accessing, the USB thumbdrive is blinking The USB thumb drive allows you to insert or remove regardless of the power status of the projector. The direct start-up into the memory viewer mode may not operate when the USB thumb drive isinserted immediately after being removed. The Network Viewer and the Moderator functions are non-Mac-compliant. When using the following functions, you cannot use the memory viewer function. In addition, whenusing the memory viewer function, you cannot use the following functions adversely.Network viewer, Network capture, Moderator functionDirect start-up into the memory viewer modeAfter inserting the USB thumb drive, the USB thumb drive blinks, the input mode automaticallyswitches to "Network", and then an image stored in the root directory of the USB thumb drive isdisplayed on the screen.*Automatically, the same LAN mode is selected in "LAN mode select" as the last time.*If the image file is not available in the root directory of the USB thumb drive, the memory viewerbrowser window appears.*During operating the Network Viewer, the Network Capture or the Moderator functions, the directstart-up into the memory viewer mode can not operate.* When the projector is turned off and on while the USB thumb drive is left inside in the memoryviewer mode, the projector starts into the memory viewer mode and an image stored in the USBthumb drive is displayed on the screen.When you press AUTO SET/CANCEL button in the memory viewer mode, the memory viewer browserwindow as shown on page 6 appears on the screen.When you remove the USB thumb drive during operating the projector in the memory viewer mode,the input source returns to the previous one selected just before inserting the USB thumb drive.AUTO SET/CANCELbuttonRemote Control
