110Chapter 9 AppendixAuto CaputureDHCP server (Dynamic Host Configuration Protocol)It is necessary to set an IP address for each computer or equivalent equipment when a network isestablished by TCP/IP. If there exists DHCP server on the network, it will assign IP addresses to clientcomputers every time they request it. If there exists equipment with DHCP server functions (such asa server and a router) on the network, the DHCP server function may be automatically operating. Askyour system administrator whether the DHCP server is operating.ESSID (Extended Service Set Identifier)ESSID is the ID that is set to computers on Wireless LAN or access point in order to prevent eachcomputer from being crossed. The computers or access point to which the same ESSID is set cancommunicate with each other. If an ESSID is different, it is impossible to communicate. ESSIDdistinguishes between lowercase and uppercase characters, and allows you to use English one bytecharacters and half-size symbols up to 32 characters.WEP (Wired Equivalent Privacy)WEP is a security protocol for Wireless LAN. It protects computers on Wireless LAN and access pointfrom unauthorized access by setting a description code onto them. It is necessary to set the samedecryption code for equipment.TerminologyN I have deleted the AutoCapture program file on the supplied USB memory.I want to perform the AutoCapture with a commercially available USB memory.To perform Auto Capture, you should have all files and folders of "Auto Capture" folder on ‘NetworkViewer & Capture 5 (CD-ROM)’ on the root of USB memory. By copying or drag and droppingthose files and folders on the root of a commercially available USB memory, you can perform theAutoCapture as well as a supplied USB memory.
