30Chapter 4 Wired LAN configurationsNetwork Capture screenConfirming the operationConfirm that the projector has connected to the LAN properly.1. Activate “Network Capture 5” which is installed into the computer connected to the LAN .2. After “Searching projector” message appears, the name of the projector* appears on the NetworkProjector List, then the network setting has completed properly.When the name of the projector does not appear and error screen appears, the network hasnot connected yet. Try searching again with the Search PJ button. If error screen appears again,reconfirm the LAN setting. When the projector is set in the location separated by the router, see nextpage.When Firewall function (Anti-virus software) is effective, network projector may not be found. In thatcase, disable the Firewall function and try searching again.3 If the projector is named, the name will be displayed. The name can be set with the followingprocedures in “6. Basic setting and operation” “Initial setting” (p.52) . If the projector is not named,IP address of the projector will be displayed.Network Projector ListSearch PJ button
