98Chapter 8 Network capture functionsError messages Cause and correspondingCannot be displayed as PJ isunder display.Error when Start real time capture is executed. The other capture, viewer ormemory viewer function is now operating. Wait until the communication function is available.Cannot connect to PJ.Cannot establish the connection with the projector when Capture transfer, Startreal time capture or Terminate capture is executed. Check connection of the network cable.Cannot transfer data to PJ.Cannot transfer the data to the projector when Capture transfer, Start real timecapture or Terminate capture is executed. The time-out period is 10 seconds. Check the connection of the network cable.Invalid port number When the parameter is set, the reserved port number is specified. Check the parameter setting ( p.92)Error information The Capture transfer is Windows-compliant, but non-Mac-compliant.Example of advanced useDisplays the presentation data stored in the computer by using the wireless mouse functionfrom the projector.1 Start capturing of the computer PC1 by using the projector.Select “Network Capture” icon from the menu and select "PC1" and then select "Connect" ( p.96).=> The Network Capture software installed in the selected computer will start capturing.2 On the image of the PC1 projected on the screen, search a presentation file data stored in the PC1 byusing the wireless mouse function of the remote control supplied with the projector.3 Select a desired file and double click with the remote control .=> The application by which the document was created starts and the projector projects the presentation pictureon the screen.4 Start the presentation.=> By using wireless mouse function, control the page browsing and some other operations for the PC1. For further instructions of the wireless mouse, please refer to the projector’s owners manual. On the projected screen using with the network capture, the shape of the mouse pointer differs from the one onthe computer’s screen.PC4PC3CapturePC5PC2 PJ2PC1* PC provides the Network Capture.* Controls PC1 with wireless mouse.Project a screenimage of PC1with PJ2.Setting conditionProjectorInput mode: NetworkRegistering the connection:The IP address of thecomputer and properparameter must be set tothe PC1 ( p.92-93).Mouse Display: "On"( p.95)Computer PC1Software:The Network Capture 5 isactivated.
