63E-mail settingL When lamp corres. value reaches preselect use time: The projector sends a free message when the lamp use time (Corresponding value) reaches thepreselected lamp use time. It can be used for preparation of the lamp replacement and the maintenancerequired.TITLE: Message from projector10-03-2007 00:59Projector Model Name: model nameTCP/IP: 192.168.1.201 Projector Name: Proj05It sends you following message.*The accumulated lamp use time reaches 1800 hours.Prepare for the lamp replacement.Discretional messagesL When internal PJ temperature is too high: The projector let users know the information which thermal sensors inside the projector detected theabnormal temperature risen and so the projector was turned off. Please refer to item "Power controland status check" ( p.68) for the location of the sensors and each temperature . Also see the owner'smanual of the projector for further details.TITLE: Message from projector10-03-2007 00:59Projector Model Name: model nameTCP/IP: 192.168.1.201 Projector Name: Proj05It sends you following message.*The Projector lamp is turned off, because internal Projector temperature is too high.Wait for the completion of the cooling process and make sure the projector has beenturned into Standby. Then turn the projector on again.If the Indicator continues flashing, check the air filter for dust accumulation.[A] 81.5 degrees fahrenheit [B] 134 degrees fahrenheit [C] 95.6 degrees fahrenheitTemperature of Sensor B is too high.L When PJ needs service::TITLE: Message from projector10-03-2007 00:59Projector Model Name: model nameTCP/IP: 192.168.1.201 Projector Name: Proj05It sends you following message.* Maintenance requirement from Projector is detected.Check up LED status of projector and consult with the dealer.MAIN, P-FAIL OKMAIN, 1.8V OKMCI, P-FAIL NG Maintenance requirement from Projector is detected. Unplug the AC power cord and plug it again, andthen turn on the projector to verify the operation. If the problem still persists, unplug the AC power cordand ask servicing to a qualified service personnel.Error information
