44Chapter 5 Wireless LAN configurations WIRELESS indicator displayWireless factory defaultSelect “Network factory default” in the Network menu (p.33) and press SELECT button. All the wirelessLAN settings will go back to the factory default settings. For details, refer to “Wireless LAN factorydefault settings” (p.46).Computer environment and Wireless LAN connection;Wireless LAN with Wireless Easy setting connection will be made via AdHoc mode. For setting contents,refer to “Wireless LAN factory default settings” (p.46).With the Easy setting, computer’s LAN environment setting will be switched to the setup environment.Because of that, the LAN cannot work for the other operation while using “Network Capture 5”.After terminating the application or pressing the Wireless Easy Setting button, the LAN environmentwill automatically go back to the previous state.Display the current LAN connecting environment. Select “Network Information” from the projectormenu and press SELECT button.The Network PIN code is to restrict the access from the networks to the projector.After setting the Network PIN code, you need to enter it to operate the projector via the networks.Select “Network PIN code” from the projector menu and press SELECT button. Set with the sameprocedures as setting Wired LAN Network PIN code. Refer to “4. Wired LAN Configurations” “NetworkPIN code” (p.32).Network informationNetwork PIN codeWireless Information (Example)
