15PJ NETWORK MANAGEROWNER'S MANUALSetting up the password of TelnetThe password of telnet can be set up by the procedure below. It is necessary to make apassword, same as the network password.1 Select a target which you want to set up the password of telnet from the status list. Youcan select multiple targets.2 Select Telnet setting from Target menu, Telnet setting dialog box will appear as thebelow figure. Set a password and click OK button. When multiple targets are selected, allthe selected targets are set as the same password.Setting up the password of Telnet The initial setting is "0000".Setting commands batch processing for multiple targetsThe commands batch processing for multiple targets can be set up by the procedurebelow.1 Select a target belonging to the batch processing group which you want to set, andselect Commands batch processing from Target menu. Commands batch processingdialog box will appear as the below figure.2 Select a command which you want to set, click Edit button. Parameter editing dia-log box will appear. Select a parameter, and then click OK button. The check box ofCommands batch processing dialog box will be checked.3 Click OK button. The commands are carried out to all the targets of the same group. The commands also work for the target which is not set to a group.
