14Chapter 3 Basic OperationDisplaying all the status information of the targetSelect a target and click button on the tool bar. The following status window appearsand displays all the available status information of the target. The target name and item which have anabnormality or connection error happen-ing are indicated with red. When PJ Network Manager cannotacquire the value of column information,"---" is displayed.Stopping monitoring the targetTo stop monitoring the target, click button again on the tool bar. The projectors setting different network passwords cannot be set to the same group. It isnecessary for the projectors in the same group to set to the same password. The above procedure can perform by selecting Target display from Display menu.Setting the target groupThe target group can be set up by the procedure below. When you set a command in thesame group, you set it.1 Select targets which you want to set from the status list. Select Group setting fromTarget menu, the dialog box will appear as the below figure.2 Select a group, and then click OK button. "---" will not set the group.
