71SystemThis function is to select the system of signal input to the projector. The available system modes arelisted on the pull-down menu button according to the input signal. Select a system and then click Setbutton. If the modes (Mode1 to Mode5) stored in the item "PC Adjustment" ( p.74) are available, they are also listedtogether with the above mode.ControlsAvailable selection at the RGB(PC analog) inputItem DescriptionXGA1 ..........................It automatically switches to the proper computersystem of the input signal.* The computer system modes (VGA, SVGA, XGA. SXGA,UXGA, WXGA...) which meet the input signal listed.Available selection at the RGB(PC digital) inputItem DescriptionD-XGA ........................It automatically switches to the proper computersystem of the input signal.* The computer system modes (D-VGA, D-SVGA, D-XGA.D-SXGA1...) which meet the input signal listed.Available selection at the Video/S-video/Scart inputItem DescriptionAUTO..........................It automatically switches to the proper color system ofthe input signal.* The selectable color systems are PAL, SECAM, NTSC,NTSC4.43, PAL-M and PAL-N.* AUTO is fixed at the Scart input.Available selection at the RGB(AV HDCP) inputItem DescriptionD-480p.......................It automatically switches to the proper scanning systemof the input signal.* The selectable scanning systems are D-480p, D-575p,D-720p, D-1035i and D-1080i.Available selection at the Component inputItem DescriptionAUTO..........................It automatically switches to the proper scanning systemof the input signal.* The selectable scanning systems are 480i, 575i, 480p,575p, 720p, 1035i and 1080i.
