6. TERMINAL FILE PROGRAMMING EO3-111066.16 Display item Name Programming6-853) ExampleTo program “BALANCE DUE” instead of standard program data “TOTAL” for Item Code 3.Operation LCD Display RemarksWhen the ECR is being outside a saleand in SET mode, depress the [↓] key.The cursor is moved on to “2 NAMES”.Depress the [2] or [Enter] key. “2 NAMES” is selected.Depress the [↓] key seven times. The cursor is moved on to”8 DISPLAY ITEM NAME”.Depress the [8] or [Enter] key. ”8 DISPLAY ITEM NAME” is selected.Depress the [↓] key twice, thendepress the [Enter] key.(Item code 3 (“TOTAL”) is selected.)While ? is shown on the upper-right cornerof the LCD display screen, the [?] keydepression results in that the followingguidance message appears on the LCDdisplay.The [C] key depression clears thedisplay item name alreadyprogrammed.The display item name already programmedis displayed.Input a desired name. Numbers of programmed characters and ofprogrammable characters are displayed onthe 7-segment numeric display.Example of key operation)[B] [A] [L] [A] [N] [C] [E] [→] [D] [U] [E][Enter]The [Enter] key depression results inthat the input name is entered anddisplayed.When the [Enter] key is depressed, theprogrammed data is printed.(continued on the next page)
