TEC MA-600 Series Programming Manual

Also see for MA-600 Series: Owner's manual Maintenance manual

Contents

6. TERMINAL FILE PROGRAMMING EO3-111066.13 Salesperson Name Programming6-693) ExampleTo program “White” on Salesperson Code 01:Operation LCD Display RemarksWhen the ECR is being outside a saleand in SET mode, depress the [↓] key.The cursor is moved on to “2 NAMES”.Depress the [2] or [Enter] key. “2 NAMES” is selected.Depress the [↓] key four times. The cursor is moved on to”5 SALESPERSON NAME”.Depress the [5] or [Enter] key. ”5 SALESPERSON NAME” is selected.Depress the [Enter] key.(Salesperson 01 is selected.)While ? is shown on the upper-right cornerof the LCD display screen, the [?] keydepression results in that the followingguidance message appears on the LCDdisplay.The [C] key depression clears thesalesperson name alreadyprogrammed.The salesperson name already programmedis displayed.Input a desired name. Numbers of programmed characters and ofprogrammable characters are displayed onthe 7-segment numeric display.Example of key operation)[W] [A/a] [h] [I] [t] [e] [Enter]The [Enter] key depression results inthat the input name is entered anddisplayed.When the [Enter] key is depressed, theprogrammed data is printed.(continued on the next page)